The new Holley EFI Hi-Ram intake provides the ultimate performance with the new GM direct injected Gen V 6.2L LT1 engine. The modular design of this manifold allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. The optional injector bosses on the intake runners allow increased performance potential by using additional injectors along with the factory direct injection. When you look for the pinnacle of performance, price, and quality, look to Holley EFI.
Features:
- Modular Design w/ Removable Top
- Available With or Without Injector Ports in the Runners
- Fuel Rails are Anodized, Laser Etched, and Machined for 8AN O-Ring Fittings at Each End
- Rear of Plenum Machined for MAP and 3 Vacuum Ports
- Head Flange has Clearance for Fuel Supply to High Pressure Pump
- Increased Runner Wall Thickness for Custom Porting at the Plenum to Runner Entry on Each Runner
- O-Ring Seals at Cylinder Heads and Plenum Top
- Easy Assembly w/ Top Mounted Screws on Plenum Top (all except front 2 screws)
- Injectors are 40mm Height measured O-Ring to O-Ring utilizing a 14mm O-Ring diameter, not for use in LS2/LS3/LSA applications without the use of a custom lower O-Ring
- Overall Height: 13.34” (w/ EFI Top - 95mm or 105mm) – See Drawing
- A-B Height: 12.10” (w/ Carb Style Top - 2 x 4150 or 2 x 4500) – See Drawing
- Height at Plenum Flange: 9.44”
- Port Size: 2.06” Height x 1.53” Width
- Runner Length: Approx. 6.5”
- Large Plenum Volume of 549 Cubic Inches (w/ 1 x 95mm or 1 x 105mm Throttle Body Top)
- Intakes w/ Injector Ports Include Fuel Rails w/ Dual Mounting (1.48” or 2.56” O-ring to O-ring injector length)
- Several Top Options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or Blank Flange for Custom Throttle Bodies
- 3500-8000+ RPM Power Band
- Engine Block Style:
- Stock/OEM standard deck
- Style:
- Tunnel Ram/Direct injection
- Basic Operating RPM Range:
- 3,500-8,000
- Material:
- Aluminum
- Finish:
- Natural
- Height:
- 13.340 in.
- Intake Section Included:
- Complete
- Multi-Port Fuel Rails Included:
- N/A
- Carburetor Quantity:
- N/A
- Carburetor Mounting:
- N/A
- Throttle Body Bore Size:
- 105mm
- EGR:
- No
- Has Bosses:
- Yes
- Bosses Machined:
- No
- Boss Quantity:
- Eight
- Injectors Included:
- No
- Fuel Rails Included:
- Yes
- Aftermarket Fuel Rail Required:
- No
- Throttle Body Included:
- No
- Quantity:
- Sold as a kit.
- Notes:
- The fuel rails and the ports on this manifold are designed to accept Bosch-style EV-1 or GM LS7 fuel injectors. Kit includes mounting hardware and gaskets.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen V (LT-based engines)
- Engine Sizes:
- 6.2L/376
- Years:
- 2014-2021
- Cylinder Head Style:
- N/A
