TRZ Motorsports 1997-2011 C5-C6 K-Member Kits are designed to replace the stock k-member and a-arms. Made to utilize a coil-over shock. This is a light weight kit designed for drag racing applications. These kits can reduce the front end weight of a 1997-2011 C5-C6 Corvette up to 70lbs. Track width is narrowed approximately 1 inch per side. Kits have 8 degrees positive caster built-in. All Rod-Ends are Chrome-Moly.
All kits include, One Chromoly K-Member, one sets of chromoly rod end upper and lower a-arms (one drivers side, one passenger side), One set of chromolly drop spindles (Spindle Mount)(will NOT accept a factory type C5 / C6 front brakes), one set of billet aluminum steering arms. Custom length manual rack and pinion with mounts welded to the K-member. Not designed for power steering. Can be ordered without rack and Rack mounts if you want to do a custom rack.
Features:
- Custom Length Manual Rack and Pinion
- 6061 LH & RH Tie Rod Adjusters / Bump Steer Kit
- Steering Shaft, (2) Chrome-Moly U-Joints, and steering column adapter
- Designed to Replace Stock K-Member and A-Arms and Utilize a Coil-Over Shock
- Designed for Drag Race Applications ONLY
- Reduces Weight by up to 95 lbs
- Narrows Track Width Approximately 1″ per side
- Built-in 8 to 10 Degrees of Positive Caster
- Premium Teflon Lined Chrome-Moly Rod-Ends and Chrome-Moly Tubing Used Throughout.
- Depending on ride height, it uses a 4″ or 5″ stroke coil-over shock (lower shock mounts need to be 1″ wide x 1/2″ ID bearing style)
- Spindle Design can utilize a Strange Standard 5-lug 5 x 4.75 Hub Strange B4154WC or with a Spindle Mount Wheel Strange B4597WC. See related products
- Strange caliper brackets require some grinding to clear these spindles
- Optional Motor Mount Pads ($150 Extra – This is NOT the Motor Mounts themselves, just the location for them to sit on) See related products
- This kit will NOT accept stock C5 / C6 Upper and Lower A-arms, brakes, or steering
- IF YOU HAVE A BRAKE KIT THAT FITS YOUR STOCK C5 / C6 SPINDLES… IT WILL NOT FIT TRZ SPINDLE FOR THIS KIT!
- Material:
- Chromoly
- Finish:
- Black Powdercoated
- Control Arms Included:
- Yes
- Coil-Over Springs Included:
- No
- Motor Mounts Brackets Included:
- Optional
- Motor Mounts Included:
- No
- Steering Rack Included:
- As an option
- Steering Style:
- Pinto
- Quantity:
- Sold as a kit.
- Notes:
- With rack mount only. Does not include rack and pinion, bump steer kit, steering rod or u-joints to connect to steer column.
- Make:
- Chevrolet
- Model:
- Corvette (1997-2012)
