AFR Eliminator aluminum cylinder heads include valves and studs in the stock L98 loca-tion. These street-legal heads have a heat riser for cold weather operation. Race-ready, 210cc and 227cc heads feature 100% CNC-ported intake/exhaust ports and combustion chambers. Competition package heads offered in 220cc, 227cc, 235cc, and 245cc versions and are also 100% CNC-ported with a 5-angle valve job. Assembled with stainless valves, valve springs, retainers, locks, and seals. sold in pairs.
- Cylinder Head Style:
- Assembled
- Cylinder Head Material:
- Cast aluminum
- Cylinder Head Finish:
- Natural
- CNC-Machined Combustion Chamber:
- Yes
- Combustion Chamber Volume (cc):
- 75cc
- Combustion Chamber Style:
- Heart
- CNC-Machined Intake Runner:
- Yes
- Intake Runner Volume (cc):
- 227cc
- Intake Port Shape:
- Rectangular
- Intake Port Location:
- Standard
- Intake Valve Angle:
- 23 degree
- CNC-Machined Exhaust Runner:
- Yes
- Exhaust Runner Volume (cc):
- 80cc
- Exhaust Port Shape:
- Square
- Exhaust Port Location:
- Raised 0.250 in.
- Exhaust Valve Angle:
- 23 degree
- Intake Valves Included:
- Yes
- Intake Valve Diameter (in.):
- 2.100 in.
- Exhaust Valves Included:
- Yes
- Exhaust Valve Diameter (in.):
- 1.600 in.
- Valve Type:
- Stainless
- Maximum Valve Lift (in.):
- 0.710 in.
- Valve Springs Included:
- Yes
- Valve Spring Type:
- Dual W/Damper
- Outside Diameter of Outer Spring (in.):
- 1.550 in.
- Valve Guides Included:
- Yes
- Valve Guide Material:
- Bronze
- Valve Seats Machined:
- Yes
- Valve Seat Material:
- Ductile iron
- Valve Seat Machine Style:
- 3-angle
- Retainers Included:
- Yes
- Retainer Material:
- Chromoly
- Valve Stem Seals Included:
- Yes
- Valve Stem Seal Style:
- Viton Positive stop
- Locks Included:
- Yes
- Lock Style:
- 10 degree chromoly
- Camshaft Style:
- Solid roller
- Spark Plug Style:
- Angled
- Guideplates Included:
- Yes
- Guideplate Pushrod Size:
- 5/16 in.
- Rocker Arm Studs Included:
- Yes
- Rocker Arm Nut Thread Size:
- 7/16-20 in.
- Accessory Bolt Holes Drilled:
- Yes
- Valve Cover Mounting Style:
- Center and perimeter bolt
- Heat Crossover:
- Yes
- Steam Holes Drilled:
- No
- Oiling Style:
- Through pushrod
- Machined for O-Ring:
- No
- Quantity:
- Sold as a pair.
- Notes:
- 60/40 Valve Spacing ,not compatible with self-aligning rocker arms. .050 Off-set or shaft mount rocker arms recommended for optimized Geometry. Exhaust port is raised 0.250 in. over stock.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen I
- Engine Sizes:
- 5.0L/305-5.7L/350
- Years:
- 1962-1986
