E-Street? cylinder heads are designed for entry-level street performance engines, ideal for operating in the idle-to-5,500 RPM range. Manufactured in the USA by Edelbrock, these heads feature A356 aluminum castings that are heat-treated to T-6 spec for superior casting strength and quality. Their modern combustion chamber designs improve the combustion process, while larger than stock intake and exhaust ports move more air through your engine. These features improve an engine?s efficiency, resulting in more horsepower and torque and improved mileage potential. Dyno tests showed a gain of 16 hp and 11 ft/lbs of torque. Sold in pairs.
- Cylinder Head Style:
- Assembled
- Cylinder Head Material:
- Cast aluminum
- Cylinder Head Finish:
- Natural
- CNC-Machined Combustion Chamber:
- No
- Combustion Chamber Volume (cc):
- 60cc
- Combustion Chamber Style:
- Heart
- CNC-Machined Intake Runner:
- No
- Intake Runner Volume (cc):
- 205cc
- Intake Port Shape:
- Rectangular
- Intake Port Location:
- Standard
- Intake Valve Angle:
- 20 degree
- CNC-Machined Exhaust Runner:
- No
- Exhaust Runner Volume (cc):
- 62cc
- Exhaust Port Shape:
- Square
- Exhaust Port Location:
- Standard
- Exhaust Valve Angle:
- 20 degree
- Intake Valves Included:
- Yes
- Intake Valve Diameter (in.):
- 2.080 in.
- Exhaust Valves Included:
- Yes
- Exhaust Valve Diameter (in.):
- 1.600 in.
- Valve Type:
- Stainless
- Maximum Valve Lift (in.):
- 0.575 in.
- Valve Springs Included:
- Yes
- Valve Spring Type:
- Single w/Damper
- Outside Diameter of Outer Spring (in.):
- 1.460 in.
- Valve Guides Included:
- Yes
- Valve Guide Material:
- Manganese bronze
- Valve Seats Machined:
- Yes
- Valve Seat Material:
- Powdered metal
- Valve Seat Machine Style:
- 3-angle
- Retainers Included:
- Yes
- Retainer Material:
- Steel
- Valve Stem Seals Included:
- Yes
- Valve Stem Seal Style:
- Positive stop
- Locks Included:
- Yes
- Lock Style:
- 7 degree
- Camshaft Style:
- Hydraulic flat tappet
- Spark Plug Style:
- Straight
- Guideplates Included:
- Yes
- Guideplate Pushrod Size:
- 5/16 in.
- Rocker Arm Studs Included:
- Yes
- Rocker Arm Nut Thread Size:
- 3/8-24 in.
- Accessory Bolt Holes Drilled:
- Yes
- Valve Cover Mounting Style:
- Perimeter bolt
- Heat Crossover:
- No
- Steam Holes Drilled:
- No
- Oiling Style:
- Through pushrod
- Machined for O-Ring:
- No
- Quantity:
- Sold as a pair.
- Make:
- Ford
- Engine Family:
- Ford small block Windsor
- Engine Sizes:
- 4.7L/289-5.8L/351
- Years:
- 1963-1995
