Please Note:
These BBK Long Tube Headers require the use of Front O2 wire harness extensions - these are not included and are recommended for installation Please check the GEN Coyote engine that you have and order the correct harness.
- GEN1 Coyote 11-14 requires Part #1112
- GEN2 Coyote 15-17 requires Part #1119
- GEN3 Coyote 18-23 requires Part #1121
Increased Exhaust Flow for More Horsepower
Significantly increase the horsepower output from your 2011-2023 Mustang GT or Boss 302 with these Titanium Ceramic BBK Performance full length headers. BBK full length headers will increase your exhaust flow giving you additional horsepower and torque. These full length headers will help give your Coyote powered Mustang a throaty exhaust note. The titanium ceramic finish adds great touch of style to your engine bay.
Designed to Perform
BBK Performance full length headers are made from 1-7/8" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. The full length primary tube design creates unrestricted exhaust flow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance.
Bolt-On Installation
These full length headers are designed as a direct bolt on with use of a BBK Performance short mid pipe. Kit includes new gaskets and hardware.
NOTE: There are 2 thread pitches in the Header Bolts supplied.
M10 x1.5 x 25mm & M10 x 1.25 x 25mm
The Ford Coyote engine Gen 1 uses a different header bolt thread pitch than Gen 2 & 3 - You must compare the supplied header bolts to the factory header stud you remove to confirm which thread pitch bolt to use to use when installing.
Emissions Information
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
It cannot be sold or shipped to any California resident or addressee.
FEATURES:
- 30+ Horsepower Increase is Typical
- Large 1 7/8" Primaries for Maximum Flow
- Leak Free Ball & Socket Collector
- 16 Gauge Steel Tubing with 3/8" Thick Flanges
- For Use With BBK Mid Pipes
- Gaskets and Hardware Included
- Durable Titanium Ceramic Finish
- Fits with Manual & Automatic Transmissions
VEHICLE FITMENT:
- 2011-2023 Ford Mustang GT
- 2016-2020 Ford Mustang GT350
- 2015+ Requires Hardware Kit 16332
- Header Style:
- Long tube one-piece
- Header Material:
- Steel
- Header Finish:
- Titanium ceramic coated
- Weld-Up:
- No
- Primary Tube Outside Diameter (in.):
- 1.875 in.
- Flange Style:
- Standard
- Flange Thickness (in.):
- 0.375 in.
- Collector Attachment:
- 2-bolt flange
- Collector Diameter (in.):
- N/A
- Collector Reducers Included:
- No
- Collector Reducer Exit Diameter:
- N/A
- Tuned:
- No
- Primary Tube Length (in.):
- N/A
- Cylinder Head Port Shape:
- Oval
- Primary Tube Gauge:
- 16-gauge
- Gaskets Included:
- Yes
- Hardware Included:
- Yes
- Crossover Pipe Included:
- No
- Crossover Pipe Style:
- N/A
- Crossover Pipe Diameter:
- N/A
- Spark Plug Position:
- N/A
- Catalytic Converter(s) Included:
- No
- Oxygen Sensor Bung:
- Yes
- Quantity:
- Sold as a pair.
- Make:
- Ford
- Model:
- Mustang GT (2011-2023)
- Model:
- Mustang GT350 (2011-2020)
- Engine Family:
- Ford Coyote
- Engine Sizes:
- 5.0L/302
