Top End Kit, Power Package, Cylinder Heads / Camshaft / Gaskets / Hardware / Intake Manifold / Lifters / Timing Set, Aluminum, Natural, Small Block Mopar, Kit
- Cylinder Head Style:
- Assembled
- Cylinder Head Material:
- Cast aluminum
- Cylinder Head Finish:
- Natural
- CNC-Machined Combustion Chamber:
- No
- Combustion Chamber Volume (cc):
- 63cc
- Combustion Chamber Style:
- N/A
- CNC-Machined Intake Runner:
- No
- Intake Runner Volume (cc):
- 171cc
- Intake Port Shape:
- Rectangular
- Intake Port Location:
- Standard
- Intake Valve Angle:
- 18 degree
- CNC-Machined Exhaust Runner:
- No
- Exhaust Runner Volume (cc):
- 77cc
- Exhaust Port Shape:
- N/A
- Exhaust Port Location:
- Standard
- Exhaust Valve Angle:
- N/A
- Intake Valves Included:
- Yes
- Intake Valve Diameter (in.):
- 2.020 in.
- Exhaust Valves Included:
- Yes
- Exhaust Valve Diameter (in.):
- 1.600 in.
- Valve Type:
- N/A
- Maximum Valve Lift (in.):
- N/A
- Valve Springs Included:
- Yes
- Valve Spring Type:
- Single w/Damper
- Outside Diameter of Outer Spring (in.):
- 1.460 in.
- Valve Guides Included:
- Yes
- Valve Guide Material:
- Manganese bronze
- Valve Seats Machined:
- Yes
- Valve Seat Material:
- Ductile iron
- Valve Seat Machine Style:
- 3-angle
- Retainers Included:
- Yes
- Retainer Material:
- Steel
- Valve Stem Seals Included:
- Yes
- Valve Stem Seal Style:
- Viton Positive stop
- Locks Included:
- Yes
- Lock Style:
- 7 degree
- Camshaft Style:
- Hydraulic flat tappet
- Spark Plug Style:
- Angled
- Guideplates Included:
- No
- Guideplate Pushrod Size:
- 5/16 in.
- Rocker Arm Studs Included:
- No
- Rocker Arm Nut Thread Size:
- N/A
- Accessory Bolt Holes Drilled:
- Yes
- Valve Cover Mounting Style:
- Perimeter bolt
- Heat Crossover:
- No
- Steam Holes Drilled:
- No
- Oiling Style:
- Through head
- Machined for O-Ring:
- No
- Quantity:
- Sold as a kit.
- Notes:
- Includes intake, heads, cam, lifters, timing chain and gears, gasket and bolt sets. 1970 340 T/A valvetrain is not compatible with these heads.
- Camshaft Included:
- Yes
- Duration at 050 inch Lift:
- 234 int./244 exh.
- Advertised Duration:
- 308 int./318 exh.
- Valve Lift with Factory Rocker Arm Ratio:
- 0.488 int./0.510 exh.
- Intake Manifold Included:
- Yes
- Intake Material:
- Aluminum
- Intake Color:
- Natural
- Intake Manifold Name:
- Edelbrock Performer RPM Air Gap
- Lifters Included:
- Yes
- Timing Chain and Gears Included:
- Yes
- Pushrods Included:
- No
- Make:
- Mopar
- Engine Family:
- Mopar small block LA
- Engine Sizes:
- 5.6L/340-5.9L/360
- Years:
- 1968-1991
