Edelbrock 2201 Small Block Chevy Rollin Thunder Camshaft, Hydraulic Roller, Lift 0.539/0.548 in, Duration 234/238, 112 LSA, Each

Edelbrock

$466.53
(No reviews yet) Write a Review
SKU:
EDE2201
MPN:
2201
UPC:
85347022014
Condition:
New
Weight:
9.03 LBS
Shipping:
Calculated at Checkout

Applies To Continental U.S. orders only

Adding to cart… The item has been added
Edelbrock Rollin' Thunder Camshaft #2201 is designed for 283-400 V8 Chevy engines from 1957-1986 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This camshaft produced 435 HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813, and Performer RPM E-Tec cylinder heads #60975. Must be used with a thrust button, a high stall converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 234 Degrees - Exhaust duration: 238 Degrees - Intake lift: .539" - Exhaust lift: .548" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 12"

Emissions Warning
Products sold on this website may not be legal for use on public roads or highways due to Environmental Protection Agency (EPA) restrictions or California Air Resources Board (CARB) emissions regulations. Federal and State regulations may restrict Product installation to pre-emissions regulation (Model Year 1974 or earlier) or to competition/racing vehicles used exclusively in
1) events organized by recognized bodies, authorizing permits for participating drivers.
2) racing event qualification, and3) practice associated with events.
Installation
 of such products, including driving racing vehicles to and from the track, may be considered illegal “tampering ” or as “defeat device”, and may result in federal and state penalties. It is the purchaser’s responsibility to ensure compliance with all applicable emissions laws, including California’s stricter standards.

Proposition 65 Warning:
This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Cam Style:
Hydraulic roller tappet
Basic Operating RPM Range:
1,500-6,500
Intake Duration at .050 inch Lift:
234
Exhaust Duration at .050 inch Lift:
238
Duration at .050 inch Lift:
234 int./238 exh.
Advertised Intake Duration:
296
Advertised Exhaust Duration:
300
Advertised Duration:
296 int./300 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.539 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.548 in.
Valve Lift with Factory Rocker Arm Ratio:
0.539 int./0.548 exh.
Lobe Separation (degrees):
112
Computer-Controlled Compatible:
No
Material:
Billet Steel
Camshaft Gear Attachment:
N/A
Valve Springs Required:
Yes
Grind Number:
N/A
Camshaft Manufacturers Description:
Hydraulic Roller - works matched with Performer RPM Air-Gap manifold, Thunder Series AVS carb and Performer RPM E-Tec cylinder heads produces 435 HP/435 ft.-lbs. of torque.
Quantity:
Sold individually.
Make:
Chevrolet
Engine Family:
Chevy small block Gen I
Engine Sizes:
4.3L/262-6.6L/400
Years:
1958-1995