FiTech Fuel Injection is introducing the all-new Ultra Ram SBC EFI self-tunning induction system for SBC engines designed for the do-it-yourself hot rodder to the professional EFI tuner! This system is ready to go with everything you need to convert your carbureted small block Chevy to top of the line EFI FiTech self-learning technology. Made to fit your crate stock rebuilt motor to your custom built race SBC. Upgrade your induction system and be on the road sooner than any EFI system on the market today!
This system needs a fuel delivery system to provide 58 PSI of fuel pressure. A Fuel pump, fuel lines, fuel filter, and fuel pressure regulator are needed for this kit. Below is a list of fuel system components that may be needed.
| Part # | Item |
| 50004 | Go Fuel Force Fuel Surge Tank |
| 50005 | Go Fuel Dual Pump Force Fuel Surge Tank |
| 50006 | Go Fuel Force Fuel Mini Surge Tank |
| 50015 | Go Fuel in Tank Fuel Pump 800 HP Module |
| 50019 | Go Fuel in Tank Fuel Pump Returnless Module With 2 Inch Fill |
| 54001 | Go Fuel Tight Fit Regulator with Pressure Gauge |
| 54002 | Go Fuel Regulator with Pressure Gauge |
| 51003 | Go Fuel AN-6 Stainless Steel 40 Ft Hose Kit with Filter |
| 51004 | Go Fuel AN-6 Black Stainless Steel 40 Ft Hose Kit with Filter |
- ECM Included:
- Yes
- Fuel Injection System Type:
- Throttle body, Multi Port EFI
- User Interface Included:
- 4.5 in. display, touch screen
- Self Tuning:
- Yes
- User Tunable:
- Yes
- Wiring Harness Included:
- Yes
- Transmission Controller Included:
- Yes
- Drive-By-Wire Capable:
- No
- Drive-By-Wire Channels:
- N/A
- Traction Control:
- No
- Timing Control Compatible:
- Yes
- Injectors Included:
- Yes
- Fuel Injector Connector Style:
- N/A
- High Impedance Injectors:
- N/A
- Low Impedance Injectors:
- N/A
- Injector Size (lbs/hr):
- 36 lbs./hr.
- Ignition System Included:
- None
- Coils:
- No
- Ignition Coil Connector:
- N/A
- Reluctor Wheel Tooth Quantity:
- N/A
- Inputs:
- 0
- Outputs:
- 0
- Wideband Controller:
- Yes
- Wideband Channels:
- 1
- Oxygen Sensor Included:
- Yes
- Boost Control:
- Yes
- Nitrous Control:
- No
- Launch Control:
- No
- Engine Protection:
- No
- CANBUS Enabled:
- No
- CANBUS Networks:
- N/A
- Knock Control:
- No
- Knock Channels:
- N/A
- VVT Control:
- No
- VVT Channels:
- N/A
- Metering Style:
- Speed density
- MAP Sensor Included:
- Yes
- Multi-fuel Capable:
- Yes
- Flex Fuel Compatible:
- Yes
- Cam Sensor Included:
- No
- IAT Sensor Included:
- Yes
- TPS Sensor Included:
- Yes
- IAC Motor Included:
- Yes
- VR/Mag Inputs:
- No
- Data Logger:
- No
- Power Distribution Included:
- None
- Throttle Body Included:
- Yes
- Venturi Quantity:
- 1
- Venturi Diameter (mm):
- 92.00mm
- Airflow Rate (cfm):
- 1250 cfm
- Throttle Body Actuation:
- Cable
- Throttle Body Material:
- Cast aluminum
- Throttle Body Color:
- Black
- Intake Manifold Included:
- Yes
- Intake Material:
- Aluminum
- Intake Color:
- Black
- Multi-Port Fuel Rails Included:
- Yes
- Distributor Included:
- No
- Fuel System Included:
- None
- Fuel Pump Included:
- No
- Fuel Pump Flow Rating (lph):
- N/A
- Fuel Pressure Regulator Included:
- No
- Maximum Horsepower with Gas:
- 650
- Quantity:
- Sold as a kit.
- Notes:
- This kit is designed for 1986 and earlier small block Chevrolet engines.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen I
- Engine Sizes:
- 4.3L/262-6.6L/400
- Years:
- 1955-1986
- Cylinder Head Style (application):
- Stock configuration
- Transmission:
- Manual
