Ford M-6250-E303 SB Ford Camshaft, Hydraulic Roller, .498/.498 Lift, 282/282 Duration, 110 LSA

$345.32
MSRP: $410.00
(You save $64.68 )
(No reviews yet) Write a Review
SKU:
FRDM6250-E303
MPN:
M-6250-E303
UPC:
756122625019
Condition:
New
Weight:
10.40 LBS
Shipping:
Calculated at Checkout

Applies To Continental U.S. orders only

Adding to cart… The item has been added

The legendary E303 cam developed by Ford Performance for the 5.0L Fox-body Mustang. This cam provides a noticeable power improvement and lumpy idle while maintaining good driveability with a manual transmission. Works well with carburetors or mass air fuel injection.

 

Excellent Low And Mid-Range Torque,
2500-5500 RPM Range
Excellent Low And Mid-Range Torque,  2500-5500 RPM Range
Features
  • Fits 1985 and later 302 roller cam blocks
  • Will also fit 1963-1984 non-roller cam 289-302 blocks when used with hydraulic roller lifters
  • Will also fit 1994-1997 351W blocks with factory roller cam
  • Will also fit 1969-1993 non-roller cam 351W blocks when used with hydraulic roller lifters
  • Requires upgraded valve springs
  • Valve spring requirements: 120 lbs valve seat pressure minimum 295 lbs open
  • On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI or speed density EFI systems
  • Also fits 1994-97 351W with factory roller cam when used with mass air EFI
  • Stock 5.0L HO cam advertised specs are 266°/266° duration, 0.444"/0.444" lift
  • Higher stall torque converter recommended for automatic transmission
  • Cam Style:
    Hydraulic roller tappet
    Basic Operating RPM Range:
    2,500-5,500
    Intake Duration at .050 inch Lift:
    220
    Exhaust Duration at .050 inch Lift:
    220
    Duration at .050 inch Lift:
    220 int./220 exh.
    Advertised Intake Duration:
    282
    Advertised Exhaust Duration:
    282
    Advertised Duration:
    282 int./282 exh.
    Intake Valve Lift with Factory Rocker Arm Ratio:
    0.498 in.
    Exhaust Valve Lift with Factory Rocker Arm Ratio:
    0.498 in.
    Valve Lift with Factory Rocker Arm Ratio:
    0.498 int./0.498 exh.
    Lobe Separation (degrees):
    110
    Computer-Controlled Compatible:
    Yes
    Valve Springs Required:
    Yes
    Grind Number:
    M-6250-E303
    Camshaft Manufacturers Description:
    Excellent Low And Mid-Range Torque, 2500-5500 RPM Range
    Quantity:
    Sold individually.
    Notes:
    Will not work with Speed Density applications. A modified computer chip may be required.
    Make:
    Ford
    Engine Family:
    Ford small block Windsor
    Engine Sizes:
    4.7L/289-5.8L/351
    Years:
    1963-2001