Terminator X and X Max Coyote systems supports Ford Coyote platform with Ti-VCT. Terminator X features real-time fuel learn, high impedance injector drivers, integrated 1bar MAP sensor, and 4 programmable inputs and outputs. These are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Terminator X ECU comes fully loaded with base maps for common Coyote engine combinations to get you out of the garage and on the road/track fast. The included 3.5" LCD touch screen handheld contains an easy to use calibration wizard as well as tuning and gauge display functions. Included with Terminator X is Holley EFI's industry leading support, easy to use software suite that allows full laptop access/compatibility for advance users. Whether you're building a budget beater or full on race car, Terminator X has the industry leading features and technology you need at a price that won't break the bank.
Features:
- Plug and play engine control (for Ford 5.0L Coyote with Ti-VCT (Twin Independent Variable Camshaft timing)
- Plug and Play compatible with Holley EFI accessories – Analog gauges, shift lights, modules, and both 6.86” and 12.3” Pro Dash
- EV1 or EV6 injector harness included (depending on your injector configuration)
- High Impedance Injector drivers power Holley EFI and most stock injectors -Injector support chart found in instructions (will not support low impedance injectors)
- Included Bosch LSU 4.9 wideband O2 sensors for accurate readings and precise tuning control
- Built in 1bar MAP (manifold absolute pressure) sensor included - For Boosted applications – internal MAP sensor can be disabled and utilize external MAP sensor harness (kit includes a terminated connector for seamless installation)
- Vacuum hose adapters included - (1/8”, ¼”, and 3/16” sizes)
- 4 inputs – 12v, Ground, 5v, and frequency for items like pressure sensors, activation triggers, nitrous activation, or trans brake
- Boost Control – boost vs. time, boost vs. gear, boost vs. RPM, boost vs. speed, and boost safeties
- Nitrous Control – channels for wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR (Air/Fuel Ratio)
- Advanced Tables – ( 4x 1D tables, 1x 1D gear table, 4x 2D table, and 1x 2D gear tables) for nearly unlimited table configuration options
- On-board diagnostic LEDS - ECU power, engine run, TPS calibration, cam signal, and more! Identify critical engine parameters at a glance
- 3.5” touchscreen handheld included - Internal data-logging, custom gauge display, and calibration wizard allow quick building bases tunes for any Domestic V8 engine
- Compact ECU (Engine Control Unit) – At only 7.45” x 4.1” x 1.66” the compact packaging allows mounting virtually anywhere (XMAX ECU = 9.6” x 4.1” x 1.66”). REMINDER: diagnostic LED’s must face up!
- FREE EFI Tuning software – For compete control of your Terminator X power plant
Instructions:
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
- ECM Included:
- Yes
- Fuel Injection System Type:
- Throttle body, Multi Port EFI
- User Interface Included:
- 3.5 in. display, touch screen
- Self Tuning:
- Yes
- User Tunable:
- Yes
- Wiring Harness Included:
- Yes
- Transmission Controller Included:
- No
- Drive-By-Wire Capable:
- Yes
- Drive-By-Wire Channels:
- 1
- Traction Control:
- No
- Timing Control Compatible:
- Yes
- Injectors Included:
- No
- Fuel Injector Connector Style:
- USCAR/EV6
- High Impedance Injectors:
- Up to 8
- Low Impedance Injectors:
- No
- Injector Size (lbs/hr):
- N/A
- Ignition System Included:
- None
- Coils:
- Up to 8
- Ignition Coil Connector:
- Ford Coyote 3-pin
- Reluctor Wheel Tooth Quantity:
- 35
- Inputs:
- 4
- Outputs:
- 4
- Wideband Controller:
- Yes
- Wideband Channels:
- 1
- Oxygen Sensor Included:
- Yes
- Boost Control:
- Yes
- Nitrous Control:
- Yes
- Launch Control:
- Yes
- Engine Protection:
- Yes
- CANBUS Enabled:
- Yes
- CANBUS Networks:
- 1
- Knock Control:
- Yes
- Knock Channels:
- 2
- VVT Control:
- Yes
- VVT Channels:
- 2
- Metering Style:
- Speed density
- MAP Sensor Included:
- Yes
- Multi-fuel Capable:
- No"
- Flex Fuel Compatible:
- Yes
- Cam Sensor Included:
- No
- IAT Sensor Included:
- No
- TPS Sensor Included:
- No
- IAC Motor Included:
- No
- VR/Mag Inputs:
- No
- Data Logger:
- Yes
- Power Distribution Included:
- None
- Quantity:
- Sold as a kit.
- Notes:
- Engines equipped with EV6 injectors and drive-by-wire throttle. Includes 3.5 inch display. Cannot program through EFI Standalone Digital Dash Kits.
- Make:
- Ford
- Engine Family:
- Ford Coyote
- Engine Size:
- 5.0L
- Years:
- 2013-2015
- Transmission:
- Manual
