The Outlaw Series 4-Link Kit is a high quality kit designed to hold up to high horsepower.
Kit includes:
- (4) Pro Series 1/4" thick 4130 chassis 4-link brackets.
- (8) 1/8" doubler plates for chassis brackets
- (4) Pro Series 1/4" thick Mild Steel or 4130 housing 4-link brackets
- (8) 1/8" doubler plates for housing brackets
- (4) 1-3/8" .095 4130 pro 4-link bars
- (4) 3/4"-16 LH & RH tube adapters
- (1) 1/2" x 3/4"-16 4130 Rod End Kit
- (2) 3/4" wide billet threaded shock mounts with 1/2"-20 grade 8 shock bolts
- 1/2" NAS 4-link bolt hardware
This kit features NAS bolts with MilSpec nuts. Close tolerance holes for the 1/2" NAS bolts provide considerably less bolt movement than competitors systems. Features .750" hole spacing instead of the normal 1" spacing to allow for a closer range of adjustment.
During installation while mocking up and welding Team Z recommends the use of grade 8 bolts with our 4-link jigs (available separately) to hold the brackets together in the correct position. After all the welding is complete we recommend reaming the holes and using our NAS 4-link bolt kit during final assembly for even less bolt movement. (Do not use a drill bit!)
- Brackets Included:
- Chassie/Housing End
- Length (in.):
- N/A
- Crossmember Included:
- No
- Diagonal Link Included:
- No
- Shock Mounts:
- Yes
- Wheelie Bar Mounts:
- No
- Finish:
- Natural
- Material:
- Chromoly/Mild Steel
- Upper Tube Diameter (in.):
- 1 3/8 in.
- Lower Tube Diameter (in.):
- 1 3/8 in.
- Rod Ends Included:
- Yes
- Hardware Included:
- NAS bolts
- Welding Required:
- Yes
- Axle Tube Diameter (in.):
- 3.50 in.
- Quantity:
- Sold as a kit.
