Fits: 1993-'97 F-Body, Impala.
Oil Pan, Steel, Clear Zinc, Deep Sump, Steel, Wet Sump, 5.5 Quart Capacity, 7-1/2" deep
Engine Application: LT1, LT4, one-piece real seal
Engine Application: SBC 1986 and Newer engine blocks with one-piece seal and passenger side dipstick
Note: If the factory low oil warning sensor is not going to be used, Part 22738, 20mm Plug with copper washer is available.
Features
- Kicked-out sump and trap door baffling for improved oil control in drag racing, road racing and street applications
- Clears 4.125" stroke with most steel rods
- Windage screen
- 20mm fitting for the factory oil level sensor*
- Clears stock exhaust and Hedman®, Hooker®, Borla® and similar-type headers
- Uses stock dipstick
| PART NO. | RECOMMENDED PICKUPS |
| 24185 | Fits: Moroso SBC 3/4" Inlet, M10552/M10555 Style Pumps, 7-1/2" Deep Oil Pans |
| 24813 | Fits: Moroso SBC 3/4" Inlet, M155HV Style Pumps, 7-1/2" Deep Oil Pans |
| 24212 | Fits: Moroso SBC Race Pump Nos. 22099, 22101 or M55 style pump |
| 24213 | Fits: Moroso SBC HV Race Pump Nos. 22109, 22111 or M55HV style pump |
| PART NO. | AVAILABLE OPTIONS |
| 22738 | Plug, 20mm x 1.5, Male with Copper Washer |
| 93151 | Oil Pan Gasket, 86-up block with a 1 piece rear main seal |
| 25970 | Universal Dipstick Kit |
| 25971 | Universal Dipstick Kit, Braided Stainless Flex Tube |
| 25973 | Universal Dipstick Kit, Twist Lock |
| 38551 | Oil Pan Flange Head Bolts, SBC |
- Rear Main Seal Style:
- 1-piece
- Sump Style:
- Wet
- Stroker Clearanced:
- Yes
- Dipstick Provision:
- No
- Dipstick Included:
- No
- Maximum Stroke with OE Rod:
- 4.125 in.
- Dipstick Location:
- N/A
- Sump Location:
- Rear
- Oil Pan Capacity:
- 5.50 quarts
- Oil Pan Depth (in.):
- 7.500 in.
- Oil Pan Material:
- Steel
- Oil Pan Finish:
- Clear zinc
- Baffled:
- Yes
- Kicked Out:
- Yes
- Kickout Position:
- N/A
- Windage Tray Included:
- Yes
- Pickup Included:
- No
- Oil Pump Included:
- No
- Oil Pump Driveshaft Included:
- No
- Crank Scraper Included:
- No
- Drain Plug Thread Size:
- 1/2 in.-20
- Gaskets Included:
- No
- Hardware Included:
- No
- Quantity:
- Sold individually.
- Notes:
- Includes 20mm fitting for oil level sensor. Uses stock dipstick. Some stroker applications may require trimming of baffling system.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen II (LT-based engines)
- Engine Sizes:
- 5.7L/350
- Years:
- 1993-1997
