Steel, Wet Sump, 7 Quart Capacity, 6-1/4" Deep
Fits: Early Ford Chassis that require a front sump oil pan, check measurements
Engine Application: Ford 5.0 Modular "Coyote" Engines
Note: If the factory low oil warning sensor is not going to be used, Part 22738, 20mm Plug with copper washer is available.
Features
- For Ford 5.0 "Coyote" Engine Blocks
- Designed to install Ford 5.0 "Coyote" Engines into early Ford chassis that require a front sump oil pan
- Oil pan has a thick steel rail with a 6-1/4" deep, 12" wide by 8" long front sump and a 2-3/8" deep rear section
- Designed to be used with the 5.0 "Coyote" factory windage tray and dipstick
- Features a race proven trap door assembly and anti-slosh baffle that keeps oil contained in oil pump pickup area during road racing and drag racing
- 1/2" NPT fitting for oil temperature sender and dipstick provision
- 20 mm fitting for the factory oil level sensor*
- Requires the use of Oil Pump Pickup No. 24573
| PART NO. | RECOMMENDED PICKUP |
| 24573 | Fits: Moroso Part No. 22203,Factory 5.0/5.2 Gen 1 & 2 Oil Pumps |
| 24576 | Fits: Factory 5.0/5.2 Gen 3 Oil Pumps |
| PART NO. | AVAILABLE OPTIONS |
| 22936 | Windage Tray & Oil Pan Gasket, Ford 5.2 Voodoo, with modifications |
| 22738 | Factory Low Oil Warning Sensor Plug, 20mm |
| 25970 | Universal Dipstick Kit |
| 25971 | Universal Dipstick Kit, Braided Stainless |
| 25973 | Universal Dipstick Kit, Twist Lock |
| 22203 | Standard Volume, Oil Pump |
| 38554 | Oil Pan Stud Kit, Coyote 5.0/5.2, Voodoo |
- Rear Main Seal Style:
- 1-piece
- Sump Style:
- Wet
- Stroker Clearanced:
- No
- Dipstick Provision:
- Yes
- Dipstick Included:
- No
- Maximum Stroke with OE Rod:
- N/A
- Dipstick Location:
- N/A
- Sump Location:
- Front
- Oil Pan Capacity:
- 7.00 quarts
- Oil Pan Depth (in.):
- 6.250 in.
- Oil Pan Material:
- Steel
- Oil Pan Finish:
- Clear zinc
- Baffled:
- Yes
- Kicked Out:
- No
- Windage Tray Included:
- No
- Pickup Included:
- No
- Oil Pump Included:
- No
- Oil Pump Driveshaft Included:
- No
- Crank Scraper Included:
- No
- Drain Plug Thread Size:
- 1/2 in. NPT
- Gaskets Included:
- No
- Hardware Included:
- No
- Quantity:
- Sold individually.
- Notes:
- Oil pan designed for early Ford chassis that require a front sump oil pan. Includes 0.500 in. NPT fitting for oil temperature sender and 20mm. fitting for the factory oil level sensor.Designed to be used with factory windage tray and dipstick.
- Make:
- Ford
- Engine Family:
- Ford modular V8
- Engine Sizes:
- 5.0L/302
- Years:
- 2011-2018
