The TITAN II LS3 camshaft is designed for mild performance in cars using 6.0-6.2 liter LS engines equipped with rectangular port, LS3/L99/L92 style heads. The TITAN II LS3 will have a slight performance idle and improved power throughout the RPM range with emphasis on mid-range to upper mid-range power and torque. This camshaft is designed to be used for vehicles equipped with headers, high flow exhaust and increased stall speed torque converter. Vehicles using this cam will also benefit from high flow intake systems and in some applications, increased rear axle ratios.
The TITAN series cams are designed with Cam Motion's renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability.
Recommended Accessories:
-Cam Motion .600: Lift Beehive Valve Springs or our .660" lift Dual Valve Spring Kit
-Cam Motion 5/16" .080" Wall Hardened Chromoly Pushrods
Emissions Warning
Products sold on this website may not be legal for use on public roads or highways due to Environmental Protection Agency (EPA) restrictions or California Air Resources Board (CARB) emissions regulations. Federal and State regulations may restrict Product installation to pre-emissions regulation (Model Year 1974 or earlier) or to competition/racing vehicles used exclusively in
1) events organized by recognized bodies, authorizing permits for participating drivers.
2) racing event qualification, and3) practice associated with events.
Installation of such products, including driving racing vehicles to and from the track, may be considered illegal “tampering ” or as “defeat device”, and may result in federal and state penalties. It is the purchaser’s responsibility to ensure compliance with all applicable emissions laws, including California’s stricter standards.
Proposition 65 Warning:
This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
- Cam Style:
- Hydraulic roller tappet
- Basic Operating RPM Range:
- 2,500-6,200
- Intake Duration at .050 inch Lift:
- 222
- Exhaust Duration at .050 inch Lift:
- 230
- Duration at .050 inch Lift:
- 222 int./230 exh.
- Advertised Intake Duration:
- 277
- Advertised Exhaust Duration:
- 285
- Advertised Duration:
- 277 int./285 exh.
- Intake Valve Lift with Factory Rocker Arm Ratio:
- 0.595 in.
- Exhaust Valve Lift with Factory Rocker Arm Ratio:
- 0.587 in.
- Valve Lift with Factory Rocker Arm Ratio:
- 0.595 int./0.587 exh.
- Lobe Separation (degrees):
- 113
- Computer-Controlled Compatible:
- Yes
- Material:
- Billet Steel
- Camshaft Gear Attachment:
- 3-bolt
- Valve Springs Required:
- Yes
- Grind Number:
- XA222/350-XA230/345-13+3
- Camshaft Manufacturers Description:
- Hydraulic Roller - Mild performance. Slight performance idle and improved power throughout the RPM range with emphasis on mid-range to upper mid-range power and torque. 2400-3600 stall converter.
- Quantity:
- Sold individually.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen III/IV (LS-based engines)
- Engine Sizes:
- 6.0L/364-6.2L/376
- Years:
- 1999-2015
