The TITAN KING LS1 camshaft is designed for maximum effort strip cars using 5.7-6.2 liter LS engines equipped with cathedral port, LS1 style heads. The TITAN KING will have a heavy lope at idle and explosive power in a vehicle equipped with the proper high stall torque converter, rear axle ratio and supporting intake and exhaust that has been modified or designed for high flow.
This cam was designed for people looking to get the most out of their stock bottom end 5.7-6.2 liter engine with cathedral port heads. This camshaft was designed to fit without the need to fly-cut valve reliefs in the pistons, however, as always, it is the owner's/builder's responsibility to check to assure safe clearance.
The TITAN series cams are designed with our renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability.
Recommended Accessories:
-Cam Motion .660" lift Dual Valve Spring Kit
-Cam Motion 5/16" .080" Wall Hardened Chromoly Pushrods
-Cam Motion High Performance Hydraulic Lifters
- Cam Style:
- Hydraulic roller tappet
- Basic Operating RPM Range:
- 3,500-6,700
- Intake Duration at .050 inch Lift:
- 236
- Exhaust Duration at .050 inch Lift:
- 244
- Duration at .050 inch Lift:
- 236 int./244 exh.
- Advertised Intake Duration:
- 291
- Advertised Exhaust Duration:
- 299
- Advertised Duration:
- 291 int./299 exh.
- Intake Valve Lift with Factory Rocker Arm Ratio:
- 0.621 in.
- Exhaust Valve Lift with Factory Rocker Arm Ratio:
- 0.604 in.
- Valve Lift with Factory Rocker Arm Ratio:
- 0.621 int./0.604 exh.
- Lobe Separation (degrees):
- 112
- Computer-Controlled Compatible:
- Yes
- Material:
- Billet Steel
- Camshaft Gear Attachment:
- 3-bolt
- Valve Springs Required:
- Yes
- Grind Number:
- XA236/365-XA244/355-12+3
- Camshaft Manufacturers Description:
- Hydraulic Roller - Maximum performance Strip-Race. Heavy lope at idle and explosive power in a vehicle equipped with the proper high stall torque converter, rear axle ratio and supporting intake and exhaust that has been modified or designed for high
- Quantity:
- Sold individually.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen III/IV (LS-based engines)
- Engine Sizes:
- 5.3L/325-6.0L/364
- Years:
- 1997-2015
